The LS MT1 series sub-compact tractors consist of two models; the 21.5 horsepower MT122 and the 24.7 horsepower MT125. Both models share the same features and reliability that LS Tractors owners have some to appreciate. For chores around the house to small hobby farm operations the MT1 sub-compacts can get the job done without breaking the bank.
MT1 Series Quick Specs
MT122
Engine Horsepower: 21.5
PTO Horsepower: 15
Transmission: 2 Range HST
3pt Lift: 970 lb.
Loader Lift: 886 lb.
6 Year Power Train Warranty
MT125
Engine Horsepower: 24.7
PTO Horsepower: 17.2
Transmission: 2 Range HST
3pt Lift: 970 lb.
Loader Lift: 886 lb.
6 Year Power Train Warranty
MT1 Series Features
Mechanical Front Wheel Assist (Four Wheel Drive): Easily go from rear wheel to four wheel drive with an easy move of a lever.
The twin pedal HST is a easy to operate and comfortable for any operator to use. 2 transmission ranges makes it easy to match the desired ground speed to the task at hand.
The independent PTO (mid, rear or both) is turned on or off with a conveniently located knob. Independent PTO means the PTO shaft is turning regardless of ground speed or direction.
Hydrostatic power steering makes turning easier, improves control and reduces fatigue. Plus, fewer moving parts to wear out or fail.
The roll over protection structure (ROPS) easily folds for clearance under low branches or buildings.
The category 1 3pt hitch is compatible with most implements, giving you additional choices vs. limited Category 0 hitches on other brands.
Reliable and fuel efficient Yanmar diesel engine. No DPF or reburn needed.
Makes it easy to perform routine maintenance and daily checks.
It sounds like a small thing but the high back seat is extremely comfortable. Not all sub compact tractors have a seat this comfortable to sit on while operating the tractor.
Get a Quote
MT1 Series Specifications
Engine (MT122)
- Type: 3-cylinder, Indirect-injection, Water-cooled
- Model (Tier 4 ): Yanmar 3TNV76F
- Engine HP (Gross): 21.5
- PTO HP: 15.0
- Rated Speed (RPM): 3,000
- Displacement (cu in.): 68.0
- Fuel Tank Capacity (gal): 6.6
- Alternator: 12V – 40 Amps
Engine (MT125)
- Type: 3-cylinder, Indirect-injection, Water-cooled
- Model (Tier 4 ): Yanmar 3TNV80F
- Engine HP (Gross): 24.7
- PTO HP: 17.2
- Rated Speed (RPM): 3,000
- Displacement (cu in.): 77.3
- Fuel Tank Capacity (gal): 6.6
- Alternator: 12V – 40 Amps
Drive Train
- Transmission: Hydrostatic Drive
- No. of Speeds: 2 Ranges
- Brakes: Wet, Multi-Disc
- Steering: Hydrostatic Power Steering
PTO
- Type: Independent
- Mid PTO: Standard (2500 rpm)
- Rear PTO: Standard (540 rpm)
Hydraulics
- Implement pump (gpm): 4.6
- Steering pump (gpm): 2.1
- Total flow (gpm): 6.7
- Category, 3 pt hitch: CAT 1
- Hitch Lift capacity (lb.): 970
- Lift control type: Position
Dimensions
- Overall length with 3pt (in.): 97
- Wheelbase (in.): 56
- Min. overall width with IND tires (in.): 47
- Height to top of ROPS (in.): 87
Tire Options
- Industrial Front/Rear: 18×18.5 – 10/26 x 12.0 – 12
- Turf Front/Rear: 18×18.5 – 10/26 x 12.0 – 12
Weight
- Total weight without ballast: 1,444 lb. (Tractor only)
- Total weight without ballast: 1,844 lb. (Tractor & loader)
- Total weight without ballast: 2,700 lb. (Tractor, loader & backhoe)
MT1 Series Attachments
LL1100 Quick Attach, Front End Loader with Grill Guard & 50” Bucket
LB1107 6’ Quick Attach Backhoe with available 9”, 12” & 16” Bucket
LM1160 60” Quick Attach Mid-Mount Mower
MT1 Series Recommended Implements
The following recommendations are based on decades of our experience with farm equipment. Your intended use and conditions might be different.
Rotary Cutter (brush mower): 48″
Finish Mower (3 pt): 60″
Box scraper: 48″
Rear Blade: 54″ – 60″
Landscape Rake: 60″
General Warranty: 2 Years or 750 hours
Power Train Warranty: 6 Years or 1,500 hours