The LS Tractor XJ Series small frame compact fits nicely between the sub-compact MT1 models and the larger XG value compacts. Available with both manual and HST transmissions, the XJ2025 is ideal for chores and light farm work on smaller acreages.
XJ Series Quick Specs
XJ2025
Engine Horsepower: 24.4
PTO Horsepower: 19.5
Transmission: 6 x 2 manual
3pt Lift: 1,433 lb.
Loader Lift: 1,277 lb.
6 Year Power Train Warranty
XJ2025H
Engine Horsepower: 24.4
PTO Horsepower: 18.5
Transmission: 2 Range HST
3pt Lift: 1,433 lb.
Loader Lift: 1,277 lb.
6 Year Power Train Warranty
XJ Series Features
Mechanical Front Wheel Assist (Four Wheel Drive): Easily go from rear wheel to four wheel drive with an easy move of a lever.
The twin pedal HST is a easy to operate and comfortable for any operator to use. 2 transmission ranges makes it easy to match the desired ground speed to the task at hand.
The independent PTO (mid, rear or both) is turned on or off with a conveniently located knob. Independent PTO means the PTO shaft is turning regardless of ground speed or direction.
Hydrostatic power steering makes turning easier, improves control and reduces fatigue. Plus, fewer moving parts to wear out or fail.
The roll over protection structure (ROPS) easily folds for clearance under low branches or buildings.
The category 1 3pt hitch is compatible with most implements.
Simple and reliable Mitsubishi diesel engine. No DPF or reburn needed.
Makes it easy to perform routine maintenance and daily checks.
The rear work light is standard equipment.
Get a Quote
XJ 2025H Specifications
Engine
- Type: 3-cylinder, Indirect-injection, Water-cooled
- Model (Tier 4 ): Mitsubishi S3L2
- Engine HP (Gross): 24.4
- PTO HP: 18.5
- Rated Speed (RPM): 2,500
- Displacement (cu in.): 80.4
- Fuel Tank Capacity (gal): 6.6
- Alternator: 12V – 50 Amps
Drive Train
- Transmission: Hydrostatic Drive
- No. of Speeds: 2 Ranges
- Brakes: Wet, Multi Disc
- Steering: Hydrostatic Power Steering
PTO
- Type: Independent
- Mid PTO: Standard (2500 rpm)
- Rear PTO: Standard (540 rpm)
Hydraulics
- Implement pump (gpm): 5.9
- Steering pump (gpm): 2.6
- Total flow (gpm): 8.5
- Category, 3 pt hitch: CAT 1
- Hitch Lift capacity (lb.): 1,433
- Lift control type: Position
Dimensions
- Overall length with 3pt (in.): 103
- Wheelbase (in.): 59
- Min. overall width with IND tires (in.): 44.9
- Height to top of ROPS (in.): 92.3
Tire Options
- Industrial Front/Rear: 23 x 8.5 – 12 / 33 x 12 -16.5
- Turf Front/Rear: 23x 8.5 – 12 / 33 x 12.5 – 16.5
Weight
- Total weight without ballast: 1,609 lb. (Tractor only)
- Total weight without ballast: 2,399 lb. (Tractor & loader)
- Total weight without ballast: 3,250 lb. (Tractor, loader & backhoe)
XJ Series Attachments
LL2102 Quick Attach, Skid Steer Compatible Front End Loader with Grill Guard & 50” Bucket
LB1104 6’ Quick Attach Backhoe with available 9”, 12” & 16” Bucket
XJ Series Recommended Implements
The following recommendations are based on decades of our experience with farm equipment. Your intended use and conditions might be different.
Rotary Cutter (brush mower): 48″
Finish Mower (3 pt): 60″
Box scraper: 48″ – 60″
Rear Blade: 60″
Landscape Rake: 60″
General Warranty: 2 Years or 750 hours
Power Train Warranty: 6 Years or 1,500 hours