LS XR6100 Series utility tractors are ideal for 20+ acre operations. Standard features include dual remote hydraulics, tilt steering, draft control, electric PTO, telescoping lift arms and much more. Get more for less.
XU6100 Series Quick Specs
XU6158 ROPS
Engine HP – 58
PTO HP – 51.2
Transmission – 16 forward x 16 synchro shuttle
3-Point Lift Capacity – 4,079 lbs.
Loader Lift Capacity – 2,981 lbs.
XU6158 Cab
Engine HP – 58
PTO HP – 51.2
Transmission – 16 forward x 16 synchro shuttle
3-Point Lift Capacity – 4,079 lbs.
Loader Lift Capacity – 2,981 lbs.
XU6168 ROPS
Engine HP – 68
PTO HP – 60
Transmission – 16 forward x 16 synchro shuttle
3-Point Lift Capacity – 4,079 lbs.
Loader Lift Capacity – 2,981 lbs.
XU6168 Cab
Engine HP – 68
PTO HP – 60
Transmission – 16 forward x 16 synchro shuttle
3-Point Lift Capacity – 4,079 lbs.
Loader Lift Capacity – 2,981 lbs.
XU6168 Powershuttle Cab
Engine HP – 68
PTO HP – 60
Transmission – 16 forward x 16 power shuttle
3-Point Lift Capacity – 4,079 lbs.
Loader Lift Capacity – 2,981 lbs.
XR6100 Series Features
Mechanical Front Wheel Assist (Four Wheel Drive): Easily go from rear wheel to four wheel drive with an easy move of a lever.
Easy to operate shuttle transmission with 4 ranges and 4 gear choices within each range. Matching the correct speed to the job is easy, and the shuttle transmission is great for loader work. Optional wet clutch power shuttle transmission allows for easy direction changes without pressing the clutch pedal.
The independent PTO is turned on or off with a conveniently located knob. Independent PTO means the PTO shaft is turning regardless of ground speed or direction.
Hydrostatic power steering makes turning easier, improves control and reduces fatigue. Plus, fewer moving parts to wear out or fail.
The roll over protection structure (ROPS) easily folds for clearance under low branches or buildings.
Category 1 3pt hitch with telescoping lift arms, and adjustable sway links for easy hookup and more control.
Tier 4 turbocharged 4 cylinder diesel engine. Smooth and fuel efficient.
Makes it easy to perform routine maintenance and daily checks.
Rear drawbar is standard equipment on the XG3025.
Dual remote hydraulic valves come standard on the XR4100 series tractors.
Tilt steering wheel for operator comfort.
Conveniently located 3pt position and draft control.
Get a Quote
XU6100 Series Specifications
ENGINE
Type: 4-Cylinder, CRDI, Water-cooled, Turbo Disel
Model (Tier 4): L4C25-T
Engine HP (Gross): 58
PTO HP: 51.2
Rated Speed (RPM): 2,500
Displacement (cu. in): 152.8
Fuel Tank Capacity (gal): 15.8
Alternator: 12V – 70 Amps
DRIVE TRAIN
Transmission: Synchro Shuttle
Speeds: 16F / 16R
Brakes: Wet, Multi Disc
Steering: Hydrostatic Power Steering
PTO
Type: Full Independent or Manual
Mid PTO: N/A
Rear PTO: Standard (540 rpm)
HYDRAULIC SYSTEM
Implement pump (gpm): 9.9
Steering pump (gpm): 4.6
Total flow (gpm): 14.5
Category, 3 pt hitch: CAT 2
Hitch Lift capacity (lb.): 4,079
Lift control type: Position / Draft
Remote Valves: 2 Pairs
DIMENSIONS
Overall length with 3pt (in.): 138.6
Wheelbase (in.): 80.3
Min. overall width with Ag tires (in.): 70
Height to top of ROPS with Ag tires (in.): 103
TIRE SIZE
Ag Front/Rear: 9.5 – 20, 16.9 – 24
Industrial Front/Rear: 10.5 / 80 – 18, 19.5L – 24
Turf Front/Rear: 36 x 13.5 -15 , 16.9-24
WEIGHT
Total weight without ballast (lbs.): 4,674
ENGINE
Type: 4-Cylinder, CRDI, Water-cooled, Turbo Disel
Model (Tier 4): L4C25-T
Engine HP (Gross): 58
PTO HP: 51.2
Rated Speed (RPM): 2,500
Displacement (cu. in): 152.8
Fuel Tank Capacity (gal): 15.8
Alternator: 12V – 70 Amps
DRIVE TRAIN
Transmission: Synchro Shuttle
Speeds: 16F / 16R
Brakes: Wet, Multi Disc
Steering: Hydrostatic Power Steering
PTO
Type: Full Independent or Manual
Mid PTO: N/A
Rear PTO: Standard (540 rpm)
HYDRAULIC SYSTEM
Implement pump (gpm): 9.9
Steering pump (gpm): 4.6
Total flow (gpm): 14.5
Category, 3 pt hitch: CAT 2
Hitch Lift capacity (lb.): 4,079
Lift control type: Position / Draft
Remote Valves: 2 Pairs
DIMENSIONS
Overall length with 3pt (in.): 138.6
Wheelbase (in.): 80.3
Min. overall width with Ag tires (in.): 70
Height to top of Cab with Ag tires (in.): 100.6
TIRE SIZE
Ag Front/Rear: 9.5 – 20, 16.9 – 24
Industrial Front/Rear: 10.5 / 80 – 18, 19.5L – 24
Turf Front/Rear: 36 x 13.5 -15 , 16.9-24
WEIGHT
Total weight without ballast (lbs.): 5,121
ENGINE
Type: 4-Cylinder, CRDI, Water-cooled, Turbo Disel
Model (Tier 4): L4C25-T
Engine HP (Gross): 68
PTO HP: 60
Rated Speed (RPM): 2,500
Displacement (cu. in): 152.8
Fuel Tank Capacity (gal): 21.1
Alternator: 12V – 70 Amps
DRIVE TRAIN
Transmission: Synchro Shuttle
Speeds: 16F / 16R
Brakes: Wet, Multi Disc
Steering: Hydrostatic Power Steering
PTO
Type: Full Independent or Manual
Mid PTO: N/A
Rear PTO: Standard (540 rpm)
HYDRAULIC SYSTEM
Implement pump (gpm): 9.9
Steering pump (gpm): 4.6
Total flow (gpm): 14.5
Category, 3 pt hitch: CAT 2
Hitch Lift capacity (lb.): 4,079
Lift control type: Position / Draft
Remote Valves: 2 Pairs
DIMENSIONS
Overall length with 3pt (in.): 138.6
Wheelbase (in.): 80.3
Min. overall width with Ag tires (in.): 70
Height to top of ROPS with Ag tires (in.): 103
TIRE SIZE
Ag Front/Rear: 9.5 – 20, 16.9 – 24
Industrial Front/Rear: 10.5 / 80 – 18, 19.5L – 24
Turf Front/Rear: 36 x 13.5 -15 , 16.9-24
WEIGHT
Total weight without ballast (lbs.): 4,674
ENGINE
Type: 4-Cylinder, CRDI, Water-cooled, Turbo Disel
Model (Tier 4): L4C25-T
Engine HP (Gross): 68
PTO HP: 60
Rated Speed (RPM): 2,500
Displacement (cu. in): 152.8
Fuel Tank Capacity (gal): 21.1
Alternator: 12V – 70 Amps
DRIVE TRAIN
Transmission: Synchro Shuttle
Speeds: 16F / 16R
Brakes: Wet, Multi Disc
Steering: Hydrostatic Power Steering
PTO
Type: Full Independent or Manual
Mid PTO: N/A
Rear PTO: Standard (540 rpm)
HYDRAULIC SYSTEM
Implement pump (gpm): 9.9
Steering pump (gpm): 4.6
Total flow (gpm): 14.5
Category, 3 pt hitch: CAT 2
Hitch Lift capacity (lb.): 4,079
Lift control type: Position / Draft
Remote Valves: 2 Pairs
DIMENSIONS
Overall length with 3pt (in.): 138.6
Wheelbase (in.): 80.3
Min. overall width with Ag tires (in.): 70
Height to top of Cab with Ag tires (in.): 100.6
TIRE SIZE
Ag Front/Rear: 9.5 – 20, 16.9 – 24
Industrial Front/Rear: 10.5 / 80 – 18, 19.5L – 24
Turf Front/Rear: 36 x 13.5 -15 , 16.9-24
WEIGHT
Total weight without ballast (lbs.): 5,121
ENGINE
Type: 4-Cylinder, CRDI, Water-cooled, Turbo Disel
Model (Tier 4): L4C25-T
Engine HP (Gross): 68
PTO HP: 60
Rated Speed (RPM): 2,500
Displacement (cu. in): 152.8
Fuel Tank Capacity (gal): 21.1
Alternator: 12V – 70 Amps
DRIVE TRAIN
Transmission: Power Shuttle
Speeds: 16F / 16R
Brakes: Wet, Multi Disc
Steering: Hydrostatic Power Steering
PTO
Type: Full Independent or Manual
Mid PTO: N/A
Rear PTO: Standard (540 rpm)
HYDRAULIC SYSTEM
Implement pump (gpm): 9.9
Steering pump (gpm): 4.6
Total flow (gpm): 14.5
Category, 3 pt hitch: CAT 2
Hitch Lift capacity (lb.): 4,079
Lift control type: Position / Draft
Remote Valves: 2 Pairs
DIMENSIONS
Overall length with 3pt (in.): 138.6
Wheelbase (in.): 80.3
Min. overall width with Ag tires (in.): 70
Height to top of Cab with Ag tires (in.): 100.6
TIRE SIZE
Ag Front/Rear: 9.5 – 20, 16.9 – 24
Industrial Front/Rear: 10.5 / 80 – 18, 19.5L – 24
Turf Front/Rear: 36 x 13.5 -15 , 16.9-24
WEIGHT
Total weight without ballast (lbs.): 5,121
XU6100 Series Attachments
LL5106 Quick Attach, Skid Steer Compatible Self Leveling Front End Loader with Grill Guard & 72” Bucket
LB3102 8’ Quick Attach Backhoe with Available 12”, 16”, 18” and 24” Bucket
XU6100 Series Recommended Implements
The following recommendations are based on decades of our experience with farm equipment. Your intended use and conditions might be different.
Rotary Cutter (brush mower): 72″ +
Flail Mower: 74″ – 96″
Box scraper: 72″ +
Rear Blade: 96″
Landscape Rake: 96″
General Warranty: 2 Years or 750 hours
Power Train Warranty: 6 Years or 1,500 hours