LS MT232
A 31.7-horsepower compact tractor in the standard MT2 trim, offered only with hydrostatic drive in ROPS or factory-cab configurations, with standard rear remote valves.
Starting at
$24,975 MSRP
31.7 hp
Engine HP
26.2 hp
PTO HP
1,433 lbs
1,433 lbs (at hitch end)
3-Pt Lift Capacity
11.7 gpm
11.7 gpm total flow
Hydraulic Flow
3,254 lbs
3,254 lbs (without ballast)
Operating Weight
Configurations & Pricing
The MT232 is available in several transmission and cab configurations. Starting MSRP shown; ask us for a full quote.
| Configuration | Transmission | Starting MSRP |
|---|---|---|
| MT232H (HST) | Hydrostatic 3-range | $24,975 |
| MT232HC (HST Cab) | Hydrostatic 3-range | $31,916 |
MSRP only. Pricing does not include tires, freight, setup, or dealer options. Ask us about current LS offers.
Full Specifications
Complete manufacturer specifications for the LS MT232.
Engine
- Gross Horsepower
- 31.7 hp
- PTO Horsepower
- 26.2 hp
- Engine Model
- Yanmar 3TNV88C-MLST (3-cylinder CRDI diesel)
- Displacement
- 100.2 in³
- Rated RPM
- 2,600 rpm
- Fuel Capacity
- 10.6 gal
Drivetrain
- Transmission
- Hydrostatic (HST), 3 ranges
- Drive
- 4WD
PTO
- Rear PTO
- 540 rpm (independent)
Hydraulics
- Hydraulic Flow
- 11.7 gpm total flow
3-Point Hitch
- Category
- Category I 3-point
- Lift Capacity
- 1,433 lbs (at hitch end)
Dimensions
- Overall Length
- 125 in (frame to link)
- Overall Width
- 66 in
- Overall Height
- 95 in (to top of ROPS)
- Wheelbase
- 69 in
- Operating Weight
- 3,254 lbs (without ballast)
Specs sourced from official LS manufacturer literature, current as of July 2026.
Standard Highlights
- Standard MT2 trim, hydrostatic drive only
- Standard rear remote valves (one pair)
- Independent 540 rear PTO
- Available in ROPS or factory-cab configurations
Factory Attachments
LS factory-matched attachments for the MT232.
Front-End Loader
LL3003
- Bucket Size
- 66 in
- Maximum Lift Height
- 94.3 in
- Clearance With Attachment Dump
- 67 in
- Reach At Maximum Height
- 14.4 in
- Maximum Dump Angle
- 48 deg
- Maximum Rollback Angle
- 42.5 deg
- Digging Depth
- 4.8 in
- Overall Height In Carry Position
- 51.2 in
- Lift Capacity (At Pivot Pin, 1.5m)
- 2,506 lb
- Breakout Force (At Pivot Pin)
- 3,723 lb
- Approx. Weight (Loader w/o Bucket)
- 741 lb
Backhoe
LB3001 / LB3002
- Digging Depth
- 97.2 in
- Reach From Centerline Of Swing Pivot
- 127.2 in
- Loading Height
- 76.2 in
- Swing Arc
- 160 deg
- Transport Height
- 81.8 in
- Bucket Rotating
- 180 deg
- Stabilizer Spread (Down Position)
- 67.5 in
- Stabilizer Spread (Up Position)
- 50 in
- Bucket Digging Force
- 3,663 lb
These are the factory attachments matched to this tractor. We'll confirm exact fit when we quote it.
Who This Fits
The MT232 fits owners whose ground has outgrown a sub-compact: heavier loader work, rougher terrain, bigger implements on the 3-point. It's still small enough to store in a garage bay and trailer without a heavy truck. If you're on the fence between this and something smaller, our advice is almost always the same: buy the bigger one.
Common Questions
What transmission does the MT232 come with?
The MT232 runs a hydrostatic transmission (HST). No clutching, just pedal-controlled forward and reverse. It's the easiest transmission to learn on and the most common choice for loader work, mowing, and general chores.
Is a front loader available for the MT232?
Yes — LS offers a factory-matched front-end loader for the MT232. You'll find the exact loader model and its published specs in the Factory Attachments section above. Ask us for the current loader package and pricing when you request a quote.
What warranty comes with a new MT232?
New LS tractors carry LS's factory warranty, with powertrain coverage that runs longer than the base warranty. Exact terms can change by model year and promotion, so we'll confirm the current coverage when we quote your unit.
Get a Real Quote on the MT232
Tell us what you're working on and we'll follow up with pricing and availability.
Request a Quote — MT232
We typically respond within one business day.